GrandMA3 onPC command wing XT

HOME

BRANDS

>

MA LIGHTING

>

grandMA3 onPC command wing XT

GrandMA3 full-size

MA_Logo_R_4c

csm_grandMA3-full-size_110f78f987

preview (19)

MA_Logo_R_4c

1/5

The fundamental syntax of the grandMA2 has been preserved and extended to facilitate the new functionality.

The grandMA3 software has an elegant new system-architecture incorporating new fixture, feature and effects-handling at its very heart. These ground-breaking concepts from top industry visionaries, are presented within a refined user interface, and are designed to make practical tasks more intuitive. Selecting fixtures, adjusting values, storing presets and playing back cues should all feel familiar, but improved in many details of the process.

Better overview, faster access and more accurate information will create an improved user experience in programming and busking a show.

Fixture information is now generic and allows simpler sharing of programmed data between fixtures. We also support the new GDTF (General Device Type Format) natively, allowing fixture manufactures to ensure their own fixtures are controlled as intended.

For more details of the current software version see the software category in the product section.

The grandMA3 onPC command wing XT is the grandMA3 onPC console solution. With the grandMA3 onPC software pre-installed on the built-in, genuine MA motherboard, the grandMA3 onPC command wing XT is a 4,096 parameter console that can be used in nearly any location – just add a touchscreen monitor, and it´s ready to go!

More Information

Designed as the perfect tourable hardware solution to the grandMA3 onPC software, the grandMA3 onPC command wing XT enables the look and feel of the software to be as close to a real grandMA3 console as possible.

With 40 physical playbacks, 16 assignable x-keys and a dedicated master playback section the grandMA3 onPC command wing XT provides plenty of playback options.

Thanks to the grandMA3 onPC command wing XT incorporating the command section of the grandMA3 consoles, it has never been easier to use the grandMA3 onPC software. All inputs and outputs of a grandMA3 console are available to the user. DMX, Midi, Ethernet, Timecode and Remote Control are all on hand directly at the grandMA3 onPC command wing XT. Additionally, it comes with four individual monitor outputs and two Gigabit Ethernet connectors.

Wherever it is physically difficult to use a grandMA3 console, the grandMA3 onPC command wing XT enables the user to program or playback within the grandMA3 world. Therefore, the grandMA3 onPC command wing XT can be used as a backup solution within the grandMA3 system, as a powerful control solution on the road, or for smaller theatres, shows and clubs or for pre-programming.

The grandMA3 onPC command wing XT provides the maximum amount of parameters available for grandMA3 onPC solutions: 4,096 parameters with built-in 2 DMX outputs and 2 Ethernet Gigabit connectors for DMX over Ethernet protocols.

The amount of DMX outputs varies with each grandMA3 onPC product but all of them unlock parameters for the full grandMA3 software functionality. There is no compromise in feature set and the range of products allow you to make the right choice for your budget or individual needs.

There are three choices for onPC solutions: the grandMA3 onPC command wing XT, which is the ultimate grandMA3 onPC console solution, the grandMA3 onPC command wing, which offers the ultimate grandMA3 mobile solution, and the grandMA3 onPC xPort Nodes, which offer the most cost-effective DMX output solution for software only show control.

Features

Real-time control for 4,096 parameters in combination with grandMA3 onPC software – pre-installed on built-in MA motherboard
Command section same as grandMA3 onPC command wing
29 rotary RGB backlit encoder
5 dual encoders
10 motorized 60mm faders
40 separate playbacks
16 assignable x-keys
2 motorized A/B faders 100mm
1 Level-Wheel
Individually backlit and dimmable silent (clickless) keys

Technical Specifications

grandMA2 Compatibility

The grandMA3 control consoles are compatible with shows created on grandMA2 consoles. Where features allow, existing shows can be exported from grandMA2 software 3.4 and later, for use in all grandMA3 console models.

All grandMA3 console models (except the grandMA3 onPC command wing) incorporate a fully featured Mode2, which runs native grandMA2 software.