GrandMA3 onPC command wing

HOME

BRANDS

>

MA LIGHTING

>

grandMA3 onPC command wing

GrandMA3 full-size

MA_Logo_R_4c

csm_grandMA3-full-size_110f78f987

preview (19)

MA_Logo_R_4c

1/5

The fundamental syntax of the grandMA2 has been preserved and extended to facilitate the new functionality.

The grandMA3 software has an elegant new system-architecture incorporating new fixture, feature and effects-handling at its very heart. These ground-breaking concepts from top industry visionaries, are presented within a refined user interface, and are designed to make practical tasks more intuitive. Selecting fixtures, adjusting values, storing presets and playing back cues should all feel familiar, but improved in many details of the process.

Better overview, faster access and more accurate information will create an improved user experience in programming and busking a show.

Fixture information is now generic and allows simpler sharing of programmed data between fixtures. We also support the new GDTF (General Device Type Format) natively, allowing fixture manufactures to ensure their own fixtures are controlled as intended.

For more details of the current software version see the software category in the product section.

當我們談到 onPC 解決方案時，代表的是「行動性」、「彈性」與「高性價比」的結合 —— 而這些特色正體現在 grandMA3 onPC command wing 上！這是專為 grandMA3 onPC 軟體設計的行動控制解決方案。

更多資訊

您有一台已安裝 grandMA3 onPC 軟體的電腦或筆電嗎？只需透過 USB 將 onPC wing 連接，即可開始進行節目編排。其控制區域與 grandMA3 控台一致，包括五個雙層編碼器與 40 組獨立 playback，能直接控制多達 4,096 個參數。

裝置提供三個 DMX 輸出埠，亦可透過乙太網路傳輸 DMX 訊號。後面板具備完整的 grandMA3 控台輸入輸出接口，MIDI、timecode 與遠端控制功能皆可直接使用，帶來如實體控台般的操作體驗！

grandMA3 onPC command wing 是一款強大的行動控制方案，適合巡演、小型劇場、演出、俱樂部或禮拜場所使用。如果您正在尋找一個聰明的 grandMA3 系統備援方案，或需要一套小巧的預編程站，grandMA3 onPC command wing 都將是理想選擇。

特徵

onPC wing 可與 grandMA3 onPC 搭配使用，即時控制多達 4,096 個參數
命令區設計與 grandMA3 compact 控台佈局相似
配備 29 顆旋轉式 RGB 背光編碼器
5 組雙層編碼器（dual encoders）
10 個具電動驅動功能的 60 mm 推桿（faders）
40 組獨立的播放控制（playbacks）
16 顆可自定義的 X-keys
2 組 100 mm 的電動 A/B 推桿（motorized A/B faders）
1 顆 Level-Wheel 等級控制旋鈕
獨立背光並可調亮度的靜音按鍵（無按鍵聲）
只需透過 USB 連接任何已安裝 grandMA3 onPC 軟體的電腦，即可使用

產品規格

grandMA2 Compatibility

The grandMA3 control consoles are compatible with shows created on grandMA2 consoles. Where features allow, existing shows can be exported from grandMA2 software 3.4 and later, for use in all grandMA3 console models.

All grandMA3 console models (except the grandMA3 onPC command wing) incorporate a fully featured Mode2, which runs native grandMA2 software.