top of page

GrandMA3 full-size

preview (19).png

The fundamental syntax of the grandMA2 has been preserved and extended to facilitate the new functionality.

The grandMA3 software has an elegant new system-architecture incorporating new fixture, feature and effects-handling at its very heart. These ground-breaking concepts from top industry visionaries, are presented within a refined user interface, and are designed to make practical tasks more intuitive. Selecting fixtures, adjusting values, storing presets and playing back cues should all feel familiar, but improved in many details of the process.

Better overview, faster access and more accurate information will create an improved user experience in programming and busking a show.

Fixture information is now generic and allows simpler sharing of programmed data between fixtures. We also support the new GDTF (General Device Type Format) natively, allowing fixture manufactures to ensure their own fixtures are controlled as intended.

For more details of the current software version see the software category in the product section.

grandMA3 I/O Node DIN-Rail


grandMA3 I/O Node DIN-Rail是grandMA3燈光控制系統內訊號分配的多功能工具,尤其適用於固定安裝。無論訊號在哪裡產生或需要訊號,都可以在此處放置grandMA3 I/O Node DIN-Rail並接收或發送外部訊號。


grandMA3 I/O Node DIN-Rail與grandMA3 xPort Node DIN-Rail於同一外殼。


顯示屏顯示所有輸入和輸出訊號的狀態。只需將grandMA3 I/O Node DIN-Rail添加為Session Member,即可開始使用。


將外部訊號流集成到MA-Net工作流程中從未如此簡單。一旦grandMA3 I / O Node DIN-Rail接收到MIDI、Timecode或DC Remote訊號,即可在整個grandMA3燈光控制系統中立即使用,並且可以在onPC或控制台上的任何grandMA3中使用。傳輸MIDI或Timeocde訊號也是如此。


只需添加grandMA3 I/O Node DIN-Rail並與外部訊號本地連接,即可將其集成到MA-Net3工作流程中。


grandMA2 Compatibility

The grandMA3 control consoles are compatible with shows created on grandMA2 consoles. Where features allow, existing shows can be exported from grandMA2 software 3.4 and later, for use in all grandMA3 console models.

All grandMA3 console models (except the grandMA3 onPC command wing) incorporate a fully featured Mode2, which runs native grandMA2 software.



bottom of page