top of page

GrandMA3 full-size

preview (19).png

The fundamental syntax of the grandMA2 has been preserved and extended to facilitate the new functionality.

The grandMA3 software has an elegant new system-architecture incorporating new fixture, feature and effects-handling at its very heart. These ground-breaking concepts from top industry visionaries, are presented within a refined user interface, and are designed to make practical tasks more intuitive. Selecting fixtures, adjusting values, storing presets and playing back cues should all feel familiar, but improved in many details of the process.

Better overview, faster access and more accurate information will create an improved user experience in programming and busking a show.

Fixture information is now generic and allows simpler sharing of programmed data between fixtures. We also support the new GDTF (General Device Type Format) natively, allowing fixture manufactures to ensure their own fixtures are controlled as intended.

For more details of the current software version see the software category in the product section.

grandMA3 onPC 4Port Node DIN-Rail 4k



對於完整的grandMA3 onPC安裝,grandMA3 onPC 8Port Node DIN-Rail 4k是最緊湊、最具成本效益的解決方案。與grandMA3 onPC軟體配合使用時,可以使用全部4,096個參數。經過優化的DIN導軌外殼可以輕鬆、省時地安裝在任何類型的固定安裝中,並且可以完全由PoE(乙太網供電)供電。

每個grandMA3 onPC 8Port Node都是專門為滿足固定安裝應用中不斷增長的需求而設計的,以構建可靠、穩定的同步數據傳輸主幹。可以從會話中的任何控制台或onPC站遠程配置所有節點,以輕鬆操控DMX輸出或DMX輸入。

每個onPC 8Port Node上的grandMA3都能夠處理MA-Net3、MA-Net2、sACN和Art-Net數據,並且完全符合RDM。正面的3.9英寸彩色顯示屏可簡化配置並提供每個節點狀態的快速概覽。



grandMA2 Compatibility

The grandMA3 control consoles are compatible with shows created on grandMA2 consoles. Where features allow, existing shows can be exported from grandMA2 software 3.4 and later, for use in all grandMA3 console models.

All grandMA3 console models (except the grandMA3 onPC command wing) incorporate a fully featured Mode2, which runs native grandMA2 software.



bottom of page